C5102 | 19-inch slide-in Industrial PC
The Industrial PCs of the series C5xxx are designed for 19-inch rack installation. They are equipped with
maximum performance class components and are ideally suited for machine construction and plant
engineering applications, for example with the
The 19-inch rack mount C5102 Industrial PC, equipped with Intel on an ATX motherboard, offers maximum performance class controls. The 19 inch slide-in housing measures only four rack units, yet has plenty of internal space for expansions of any
form. A CD/DVD-ROM or multi DVD drive can be fitted behind the lockable front door. The type plate
provides detailed information regarding the PC’s configuration. Carefully designed ventilation creates a
slight excess pressure inside the housing, effectively preventing the entry of dust. A stable card holder
generates insensitivity to shocks and vibrations. A C5102 Industrial PC and a Control Panel as its
operating unit create an ideal combination.
The Industrial PC offers the following benefits:
• 7-slot slide-in housing ATX for 19-inch racks, 4 rack units
• all slots for full-length plug-in cards
• lockable front flap
• card holders
• protection class IP60 when operating
• operating temperature 0…55 °C.
2.6 Interfaces from C5102-0060
2.6.1 PS/2 connections (X103, X104)
The upper PS/2 connector (X104) allows a PS/2 mouse to be used, while a PC keyboard can be
connected to the lower PS/2 connector (X103).
2.6.2 Serial interfaces COM1, COM2 (X105)
The basic version of the Industrial PC has two serial interfaces, COM1 (X105) and COM2, using the type
RS 232, which are each brought to a 9 pin SUB-D plug connector. The interface COM2 is located in the
upper part of the first slot right beside the ATX-slot.
2.6.3 USB interfaces USB1 – USB4 (X108, X109, X110, X111)
The four USB interfaces (X108 – X111) are used to connect peripheral devices with USB connections:
• Devices with Intel® 4th generation processors (C5102-0060) are equipped with 2 USB2.0 (X110,
X111) and 2 USB3.0 (X108, X109) interfaces
• Devices with Intel® 6th and 7th generation processors (C5102-0070) are equipped with 4 USB3.0
interfaces.
Two more USB interfaces are located behind the front flap. USB2.0 standard is supported.
2.6.4 Network connection LAN1, LAN2 (X112, X113)
The RJ-45 connector (X112) allows the PC to be connected to a 10/100/1000BASE-T Local Area
Network (LAN).
The RJ-45 connector (X113) allows the PC to be connected to a 10/100/1000BASE-T Local Area
Network (LAN).
2.6.5 Sound-On-Board (X114, X115, X116)
The Industrial PC has an on-board-interface with the following connectors: Line In (X116), Line Out
(X115) and Microphone jack (X114).
2.6.6 DVI-D (Digital Visual Interface) (X117, X118)
The DVI connectors (X117, X118) are used for transferring the video signal. DVI-D standard is supported.
2.6.7 DisplayPort (X119)
The DisplayPort (X119) is used for transferring the video signal.
Product Description
12 C5102
2.7 Interfaces behind the front flap
Interfaces behind the front flap:
Reset-pushbutton: The reset pushbutton (1) allows to reboot the PC.
Keyboard-Lock: The pushbutton KB-LK (2) locks the keyboard.
LEDs: The LED Power (3) indicates correct power supply.
The LED HDD (4) indicates HDD access.
The LED KB-LK (5) indicates a locked keyboard.
USB4 – USB5: The two USB interfaces (6) are used to connect peripheral devices with
USB connections.
USB2.0 standard is supported.
Power pushbutton: The Industrial PC is switched on via the power pushbutton (7).